Did you know that 7% of the wounds caused by workplace accidents are foot injuries? In the United States alone, at least 60,000 people are unable to work each year due to foot injuries. Our feet are exposed to a variety of hazards in the work environment, so you must make sure your safety boots provide adequate protection.
Here is the content list:
l What do you need to look for when shopping for safety boots?
l For different parts of the shoe, you need to know how to clean
What do you need to look for when shopping for safety boots?
The first thing to consider is fit. You should always make sure that the safety boots are not too tight and can be tied in the correct position. Make sure to fit snugly against the wearer's foot. It is also important to choose safety boots with an adequate level of cushioning. The midsole with cushioning material forms the basis for a comfortable working environment, especially on hard industrial floors. High energy return reduces fatigue. Good cushioning also protects the joints, back, and entire body. All of this reduces illness and lost work time.
Durability also plays an important role if safety boots are subjected to high daily loads. The upper material should be firm but also lightweight. The sole made of durable material can significantly extend the wearer's support time and ensure that the shoe does not need to be replaced after several weeks.
For different parts of the shoe, you need to know how to clean
For the different parts of the shoe, you need to know how to clean it. Regardless of the color of the safety boots, care should be taken to clean them properly. When cleaning the sanded parts of your shoes, use a dry emery cloth to remove any surface dirt. Then, brush lightly with an abrasive brush. Be careful not to spend more than a few seconds in any area. If there is any wear, use an eraser to remove it, or try spraying an abrasive cleaning solution and rubbing the area with an emery cloth. Be sure to follow the instructions for such products and be sure to test them on a small scale before applying them more widely. Dab the shoes with a clean towel to remove excess moisture and air dry them. Apply water repellent and stain repellant to your boots to help extend the life of your shoes. Remember, it's a good idea to waterproof your safety boots regularly to protect the leather from staining. If the leather is wet, allow it to dry naturally before cleaning or using any cleaner.
When cleaning the soles, first remove any large pieces of dirt/debris from the safety boots. Use a stiff nylon brush to clean any excess dirt. If dirt remains, soak your boots in shallow water for two hours. Again, use a stiff nylon brush to remove it. Finally, use a damp cloth for a general cleaning before letting the boots dry naturally.
If you are interested in purchasing safety boots, visit our website: https://www.safetoe.net/to get more professional information about safety boots. We will welcome you with high-quality products and good service as well as low prices! To provide comprehensive technical support to our customers, we will provide technical and other related information promptly upon request.
