#1 Alibaba Online Store Best Seller                                             #1 Amazon Online Store Best Seller  
Work boots care knowledge
Home » Blog » Safety Shoes » Work boots care knowledge

Work boots care knowledge

Views: 0     Author: Site Editor     Publish Time: 2023-10-16      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button


In different operating environments, the service life of work boots is not the same. Generally, work boots need to be cleaned and maintained regularly after some time. Do you know how to do it? In addition, summer is hot and easy to sweat after wearing for a long time, and they cover their feet. Even if the ventilation effect is very good, it is difficult to have no problems at all. After all, it is very easy to sweat in summer. Below I will introduce some work boots how to care for them and the problems that are prone to occur in summer work boots and the corresponding solutions.

Here is the content list:

l The right way to handle work boots in summer.

l How to take care of work boots?

The right way to handle work boots in summer.

First, people who are prone to sweaty feet should prepare 2 pairs of work boots in the summer, so that they can be worn differently, and the pair that is not worn should be placed in the vent. When wearing work boots, you must wear cotton socks, which can absorb sweat, and socks should be changed every day. Second, people who have smelly shoes can try to use mothballs, white vinegar, soap, etc. to remove the smell inside the shoes. Third, there is a lot of rain in summer. If our work boots are soaked by rain, we should first wipe the water on the surface of the shoes with a cloth with better water absorption, use a shoe brush to clean the dirt off every detail of the shoes, and then squeeze a little cleaning oil on the cloth, smear the entire shoe. At this time, the most important thing is to thoroughly clean the old shoe polish left on the shoe. Finally, take another cloth (not to be mixed with the cloth that uses cleaning oil), apply a little shoe polish, and cover the entire shoe. Shoe polish is about the size of your little finger. Fourth, when the seasons change, remember to clean and dry the work boots, then store them in the shoe box and store them in a dry place to avoid mold. If conditions permit, you can put some moisture-absorbing desiccant, in short, to avoid the phenomenon of dampness and mildew when the next summer comes.

How to take care of work boots?

When the work boots are not in use, it is best to put them in the shoe box first, and then store them in a ventilated and dry place to prevent bacteria and mildew. The specific storage location is more than 20cm away from the ground and wall to prevent moisture. In addition, work boots should be kept away from high-temperature areas, and at the same time, avoid direct contact with acids, oils, and corrosive solutions. Second, for enterprises or workshops with conditions, it is recommended to provide employees with two pairs of work boots, so that they can be used interchangeably and prolong the life of work boots. Third, the insole worn in the work boots should be placed in the correct position in the shoe when using it. At the same time, if it needs to be replaced after long-term wear and tear, it is recommended to replace the insole of the same brand and model. Fourth, after the work boots are stained, you can use a soft brush or a damp cloth to wipe the dust contaminants on the shoes. If necessary, you can use a brush or a damp cloth with soap or laundry detergent to wipe. During the cleaning and maintenance process, try to avoid using a hard brush or washing with water or laundry detergent directly. After cleaning the work boots, place them in a ventilated and dry place to dry immediately. Avoid using hot air blowers or dryers to dry them. After the surface of the work, boots are dry, you can use special shoe polish to apply and wipe to prolong the service life of the shoes and avoid cracking the shoe leather. Fifth, the uppers of work boots are generally online or glued. Therefore, leather work boots cannot be used as rain boots and cannot be immersed in water for a long time, otherwise, the work boots will be degummed and their lifespan will be shortened. Sixth, not only does the surface of the work boots and around the upper need to be cleaned and maintained, but also the bottom of the shoe needs to be cleaned frequently to avoid the accumulation of dirt. Because a lot of dirt will affect the anti-static function of work boots, and also reduce their anti-skid performance.

Committed to bringing customers more and better products, this is what we have been doing. If you are interested in work boots, you can contact us, our website is https://www.safetoe.net/, you are welcome, and look forward to cooperating with you.


Worldwide Leading Safety Protection Products Supplier.
 
Leave a Message

Quick Links

Products

Contact Us

Shanghai Langfeng Industrial Co., Ltd. (Safetoe)
Add: Room 910, No. 6, Lane 111, Luxiang Road, Shanghai, China (Mainland)
Tel : +86-021-5212 7320
Fax : +86-021-5212 1031
Wechat: +86-181 1626 8656
WhatsApp: +86-18116268656
 
Copyright © 2021 Safetoe. All Rights Reserved. SItemap  Support By Leadong.